TB9100/P25 CG/P25 TAG Installation and Operation Manual Preface 7© Tait Limited March 2014PrefaceScope of ManualThis manual primarily describes the TB9100 base station but also includesthe P25 CG console gateway and P25 TAG trunked analog gateway. When“base station” is referred to, this generally applies to the console gateway andtrunked analog gateway as well. When “reciter” is referred to, this generallyapplies also to the gateway module.This manual is intended for use by experienced technicians familiar withinstalling and operating base station and gateway equipment. It includes atechnical description of the equipment, maintenance and troubleshootinginformation.Document Conventions“File > Open” means “click File on the menu bar, then click Open on thelist of commands that pops up”. “Monitor > Module Details > ChannelModule” means “click the Monitor icon on the toolbar, then in thenavigation pane find the Module Details group, and select Channel Modulefrom it”.Within this manual, four types of alerts may be given to the reader. Thefollowing paragraphs illustrate each type of alert and its associated symbol.Warning This alert is used when there is a hazardous situa-tion which, if not avoided, could result in death or seriousinjury.Caution This alert is used when there is a hazardous situation which,if not avoided, could result in minor or moderate injury.Notice This alert is used to highlight information that is required toensure procedures are performed correctly. Incorrectly performed proce-dures could result in equipment damage or malfunction.This icon is used to draw your attention to information that may improveyour understanding of the equipment or procedure.
