Tait TB9100 Installation And Operation Manual

Also see for TB9100: Installation and operation manual User manual Installation and operation manual Installation and operation manual Operation manual

Contents

Tait TB9100 Installation And Operation Manual Manual pdf 35 page image

TB9100 Installation and Operation Manual Installation 35© Tait Electronics Limited May 20064 InstallationThis chapter provides information on the site requirements for your TB9100equipment and also describes how to install the base station in a standard19inch rack or cabinet.If this is your first time installing a TB9100 base station, we recommend thatyou read the entire chapter before beginning the actual installation.4.1 Before You BeginEquipment SecurityThe security of your base station equipment is a high priority. If the site isnot fully secure, the base station should at least be locked in a secure cabinetto prevent unauthorized access.The base station control panel provides access to the speaker, microphoneinput and alarm status display. It is important that control panel access isrestricted to authorized maintainers only in order to ensure theconfidentiality of voice communications and alarm status information.Grounding and Lightning ProtectionElectrical Ground The TB9100 base station modules are grounded by physical contactbetween the module case and the subrack. To ensure a good groundconnection you must tighten each module retaining clamp securely (refer to“Final Reassembly” on page 88 for the correct torque).A threaded grounding connector is provided on the rear of the subrack forconnection to the site ground point (refer to “Connecting Up the BaseStation” on page 52 for more details).Lightning Ground It is extremely important for the security of the site and its equipment thatyou take adequate precautions against lightning strike. Because it is outsidethe scope of this manual to provide comprehensive information on thissubject, we recommend that you conform to your country’s standardsorganization or regulatory body.