86 Operating in conventional modeThe message Low power tx activated appearsbriefly, and the low-power transmit icon appearson the display.2 Press the low-power transmit function key again toturn low-power transmit off, and the message Lowpower tx deactivated appears on the display.Ending active callsFor analog channels, you may have a function keyprogrammed to either end the current call, or end thecurrent call and all other active calls in your group.This can be done either by:■ using the function key programmed for reset mon-itor to end your current call,■ using the function key programmed for call clear-down to end your current call and all other calls inyour group, or■ using the function key programmed for both resetmonitor and call cleardown.Using a function key to end your current call■ Press the function key programmed for reset mon-itor. The radio’s monitor is turned off, ending yourcurrent call.The green LED stops flashingLED stops flashinggreen, and the monitor icon disappears from thedisplay.Using a function key to end all active calls■ Press the function key programmed for call clear-down and monitor is turned off for all radios inyour radio group.The green LED stops flashingLED stops flashinggreen, and the monitor icon disappears from thedisplay.
