Operating in conventional mode 895 Proceed with your call.6 To turn repeater talkaround off, either change thechannel, or choose Off in the Talkaround menu.Using a function key1 Select the required channel.2 Press the programmed function key to turnrepeater talkaround on. The message Talkaroundactivated appears briefly, and the repeatertalkaround icon appears on the display.3 Proceed with your call.4 To turn repeater talkaround off, either change thechannel, or press the function key again.Receiving a callWhen there is valid activity on your radio’s currentlyselected channel or group, the radio then unmutesand you can hear the call.If an incoming analog call contains special signalingthat matches the signaling programmed for your radio,the green LED flashesLED flashes green and yourradio may give a ringing tone.Using the radio in differentrepeater areasYour radio may have a group of channelsprogrammed as a voting group. The channels in thevoting group all carry the same traffic, but fromdifferent repeaters. As your radio moves in and out ofdifferent repeater coverage areas, the bestcommunication channel is automatically selected foryou to use, until a better communications channel isselected.
