Name of PartsThe illustrations show theAY-AXLLU / AY-RS3-1FK( )water stop knob Drain capLower backrestBasinArmrest padArmrestSeatStepShower headNeck cushionRear cover Maintenance coverTemperature control knobUpper backrestWater catcherFront coverCaution9• The back wash basin is a shampooing product designed for performing back shampooing *1 or hair/scalp care.• Check that all accessories have been attached properly.• Please note that the gap between the backrest and the basin when the backrest is reclined may vary slightlyfrom product to product.*1 Back shampooing: the user stands behind the basin and performs shampooing from the back(back position).Before Using This ProductPrecautions on Resin (Plated) PartsExample of Flaws on thePlated Surface Example of Peeling of thePlated SurfaceCheck to ensure that there are no flaws, cracks, or peeling of the plated surface of the knobsbefore using the product. If peeling is observed, immediately stop using the product andcontact your closest dealer or Takara Belmont. Continued operation may result in injuries.• Resin plating is adopted for part of the water stop knob and the temperature control knob.ࠐ Plating is a thin, hard metal film applied to the surface that may crack or peel due to corrosion oraged deterioration.ࠐ Flaws or cracks may occur on the plated surface due to impacts from falling objects.ࠐ Flaws or cracks may occur on the plated surface when a hard object hits the surface.ࠐ Peeling of the plating may occur from flaws or cracks on the plated surface.Shower hoseguide ringFiber glass shell