Takara Belmont RS III PRIME Installation Instructions Manual

ContentsBefore installationUsage conditionsContent of packagingCarrying the main bodyDimensionsAfter installationUnit fixing position and Plumbing LayoutＭＥＭＯ1.Installation of Shampoo Unit2.Piping3.Attach the seatPRIMOLITEPRIMELUXIS>4.Attach coverRSⅢ Installation InstructionsTo the installer• The instructions should be thoroughly readand understood before installation to ensurethat RSⅢ is installed correctly.After installation, give these instructions to the customer.•To the customers• Customers must ask proffessional to install RSⅢ.• Customers must not install RSⅢ by themselves.• Customers must store these instructions ina safe place so as not to lose them.* The actual shape of RSⅢ and the images anddimensions listed in these instructions may be modifiedand are subject to change without notice.Caution The precautions listed here are to ensure that RSⅢcan be installed safely, and to prevent anydanger or risk to the person installing RSⅢor those around them. All of these precautions areimportant for safety. Takara Belmont is not responsiblefor any damage or risk to the person installing RSⅢor those around them due to accidents ifRSⅢ is installed without adhering to the precautions.If RSⅢ is installed after ignoring this symbol,"there is the risk of light or moderate injury or physicaldamage".Version 4 Feb 2016Image is of--Image is of--( )( )Image is of--( )●●●●●●●Note : Plumbing should be performed by a qualifiedtechnician and should meet all national and localplumbing codes and ordinances. It is the responsibilityof purchaser and/or plumber to conform to nationaland local codes and ordinances. Takara Belmont doesnot take any responsibility or liability for plumbing andinstallation.