Feb 0534PPM Laser Printer User Guide 7-13Interface MenuInterface MenuThe Interface Menu provides access to the printer interface settings. Use the following procedureto enter the interface menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text “Interface Menu” is shown on the second line of thedisplay.3. Press the SELECT button to enter the interface menu.4. Press the NEXT button to move through the submenus: Port, Parallel Setup, Network 1Setup, Spooling, and USB Setup.Use the procedures in the following table to access and change the printer interface settings:Submenus Default Setting AvailableSettingsProcedure for Changing SettingPortThis submenu allowsyou to enable the typeof interface.Parallel:OnNetwork Card1:OnUSB:OnParallel:On, OffNetwork Card1:On, OffUSB:On, Off1. Press NEXT or PREVIOUS to togglebetween PARALLEL, NETWORKCARD 1 and USB.2. Press SELECT to save this setting.Parallel SetupThis submenu allowsyou to set up theparallel interface.Interpreter:Auto SwitchFormat:RawMode:BidirectionalDelay OutClose:OffBinary PS:OffInterpreter:Auto SwitchPCLPostScript 3Format:RawNormalBinaryMode:BidirectionalStandardDelay OutClose:OffOnBinary PS:OffOn1. Press NEXT or PREVIOUS to scrollthrough the INTERPRETER,FORMAT, MODE, DELAY OUTCLOSE, and BINARY PS submenus.2. Press SELECT to choose a submenu.3. Press NEXT or PREVIOUS to scrollthrough the settings.4. Press SELECT to choose and save asetting.
