Feb 053-2 34PPM Laser Printer User GuideNo PowerWhen Problems OccurWhen problems occur while using the printer, search for the corresponding item from the follow-ing list of problems to carry out the appropriate action for the problem.No PowerCannot PrintStatus Items to check ActionThere is no power. Is the power switched off? Press the printer switch to the position toturn the power on.See “Turning the Printer On“on page 1-18.Is the power cord disconnected or notsecurely connected?Switch off the power and connect the cord tothe power outlet and printer again. Then,switch on the power.See “Connecting the Power Cord“on page1-17.Is the power cord connected to a poweroutlet with the correct voltage?Connect the printer exclusively to an outletwith a suitable voltage rating and currentrating.Safety NotesPower is interruptedfrequently.Printer may have malfunctioned. Switch off the power to the printer, removethe plug from the power outlet and contactour Printer Support Desk.Is the power cord disconnected or notsecurely connected?Switch off the power and connect the cord tothe power outlet and printer again. Then,switch on the power.See “Connecting the Power Cord“on page1-17.Status Items to check ActionPrint instruction was sent butprocessing did not start.Is the error indicator lit?Is the error indicator blinking?Is the print-ready indicator off?Carry out the action according tothe status of the indicator.Is there any message displayed onthe control panel?Check the message, then carry outthe action.Is there any message displayed inthe computer?Check the message, then carry outthe action.