Feb 051-2 34PPM Laser Printer User GuideInstallation LocationAbout this ChapterThis chapter reviews the contents of the printer packaging, explains the parts of the printer, anddescribes the space and environment requirements of the printer.Installation LocationIn order to make use of the printer safely and comfortably, choose an installation location with thefollowing considerations.Installation EnvironmentSuitable locations■ Level and stable location (not tilted more than 5°)■ Well-ventilated location■ Temperature range: 10 to 32 °C; humidity range: 15 to 85% (no condensation) Humidityshould be 70% or below at 32 °C, and temperature should be 28 °C or below at 85% humid-ity.NOTE: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room ormoving the printer from a location with low humidity/temperature to high humidity/temperature can cause condensation inside the printer, directly interfering with imagetransfer. When condensation occurs, leave the printer alone for at least 1 hour to acclimateto the environment before using it.Using a power outlet exclusively for the printerUse one power outlet exclusively for this printer. If the printer draws power from the same circuitas other large machines, such as copiers or air conditioners, the fluctuations in the current maycause malfunctions or a loss of data. Also, electrical noise produced by machines located nearbymay interfere with the normal operation of the printer.CAUTION: Place the machine on a level and sturdy surface that can withstand a weight of 20.6kg (for 34 ppm). If tilted, the machine may fall over and cause injuries.WARNING! Three power specifications are listed below. The specifications that apply to yourprinter depend on its configuration. Connect the power plug only to a properly rated power out-let. Otherwise, it can cause fire or electric shocks. If in doubt, contact our Printer Support Desk.Rated voltage: 100 VRated frequency: 50/60 HzRated voltage: 110 VRated frequency: 60 HzRated voltage: 220 – 240 VRated frequency: 50/60 Hz