DEL (hex.7F)(dec.127)Clear previous characters in the print buffer.ESC (hex.1B)(dec.27)Start character for a subsequent program sequence.FF (hex.0C)(dec.12)When the printer receives this code, it prints the data in the print buffer, then advancesthe paper from the current print position to the top-of-form position on the next page.The next line is beginning at the left margin.HT (hex.09)(dec.9)This code causes the following characters to be printed starting from the first horizontaltab stop after the current print position. When the printer is switched on, tab stops areset at every eighth print position.The amount by which the print position is shifted by tabulation depends on the selectedcharacter spacing. When horizontal tabulation is carried out e.g. at a position being tenspaces to the right of the current print position, code HT will shift printing in normal modeone inch to the right. Except for enlarged mode, the print position at which the characterspacing is changed is defined as the first column provided that character spacing ischanged within a line.If there are no tab stops following the current print position, code HT is ignored. If thenext tab stop exceeds the right margin, the printer carries out a carriage return and linefeed on receipt of this code.LF (hex.0A)(dec.10)When the printer receives this code, it prints all the data in the print buffer and thenadvances the paper by one line.The amount by which the paper is advanced depends on the current line spacing.NUL (hex.00)(dec.0)NullSI (hex.0F)(dec.15)Selection of condensed print mode.SO (hex.0E)(dec.14)Code for double width print within one line (enlarged printing).Control Codes 117
