134. Connect to a camcorder etc. by a video/s-video/DV IN.To copy camcorder recordings, you can use the front sockets .Thesescokets are located behind the flap on the left hand side .n Best picture Qulity( Configuration A)If you have a DV or digital 8 camcorder , connect the DV IN of theDVD recorder to the appropriate DV output on the Camcorder.n Very good picture Quility (Configuration B+D)If you have H18 or S-VHS (c) camcorder , connect the S-Video 2of the DVD recorder to the S-VHS output on the camcorder.you must aslo connect the audio input L AUDIO R on theDVDrecorder to Audio output on the camcorder.n Good picture Quility(Configuration C+D)If your camcorder only have a single Video output(compositeVideo , CVBS) , connect the Video(AV 2) of the DVDrecorder to the Video output on the camcorder.you must aslo connect the audio input L AUDIO R on theDVDrecorder to Audio output on the camcorder.Connect your DVD recorder to VCR ora similar recording equipmentYou can use this unit as the source player or as the recordingdeck.Connection for recording from other equipmentYou can connect additional devises such as decorders, camcorders,etc. to the S-video /Video/component and Audio in , then you can seethe picture from the additional device on your TV set. At the sametime , you can record the program from the additional device .1. Connect to the AV IN by a video cable.(configuration A+D)2. Connect to the AV IN by a s-video cable.(configuration B+D)3. Connect with component video cable.(configuration C+D)AC B DC DA BBasic Connection(continued)