Targa DR-5200x Operating Instructions Manual
                                        | |
Contents
| 
213. Press Enter,“ ” appears.4. Press 3to return to “Angle Mark ”.Progressive Scan SettingConnect your TV set and the recorder with a YPbPr cable if yourTV set has YPbPr input jacks before you start this setting.1. Set the TV Video Output to YPbPr.2. Select “Progressive Scan ”.3. Press Enter or4 to select “ON ”.4. Select “OK ”to confirm, then the machine will automaticallyreturn to the “Progressive Scan ” screen.Video Output Setting1. Select “Video Output ”.2. Press Enter or4to select the sub menu, then press 5/6 toselect “Scart RGB ”, “S-Video ”or “YPbPr ”.Scart RGBSelect “Scart RGB ”when you have connected the Scart Outof this recorder to TV via Scart cable. This will provide a betterviewing result.S-VideoSelect S-Video when you have connected S-Video Out jacks ofthis recorder to S-Video In jacks of your TV .Select S-Video Only if your TV does not provide Progressivenor component jacks.YPbPrSelect YPbPr when you have connected YPbPr Out jacks ofthis recorder to YPbPr In jacks of your TV .3. Press Enter, “ ” appears.4. Press 3to return to “Video Output ”.5. To exit, press Video.Angle Mark Setting1. Select“Angle Mark ”.2. Press Enter or4to select the sub menu, then press 5/6 toselect “ON ”or “OFF ”.1-4 Video Setup (continued)NTSCSelect this if the connected TV set is NTSC system.It will change the video signal of a PAL video disc andoutput to NTSC system.PALSelect this if the connected TV set is PAL system.It will change the video signal of an NTSC disc andoutput to PAL format.3. Press Enter, “ ” appears, the TV display is set.4. Press 3to return to “TV Display ”. |
Related manuals for Targa DR-5200x
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine