19Finalize Disc Setting (DVD+/-R)After you finalize the disc, you can play the disc on other DVDplayers. It can be used as DVD-Video disc. But it is not guaranteed.CAUTION :After you finalize a DVD+/-R disc, you cannot edit or record onthe disc. Finish all the editing before you start to finalize the disc.1. Select “Finalize Disc ”then press Enter, a message appears.2. Press3 to to select “Yes ”.Note : If it is not necessary, select “No” and then press Enter.3. Press Enter to start to finalize, then please wait until finalizingis finished. “Menu ” screen returns.Notes :n This unit may not be able to finalize the disc if it was recordedon other DVD recorders or PCs.n You do not need to finalize the disc again once the disc hasbeen finalized with this unit.n Depending on the condition of the disc, recording, or the unit,discs may not be played even if the discs are finalized.Rename Disc Setting (DVD+/-RW & DVD+/-R)You can enter up to 10 characters for a disc name.1. Select “Rename Disc ”, then press Enter,“New Disc Name”screen appears.2. Press 3/4/5/6to select the letter or number , then pressEnter , the character appears in the box.3. Repeat steps2 to make the new title name (up to 10 characters).Note: If it is not necessary, select “Cancel ” and press Enter.If you make a mistake, select “Delete ” or “Clear ”, andpress Enter.n Delete : Every time Enter is pressed, the last character of thetitle name is deleted.n Clear : Enter is pressed, the title name is cleared at once.4. Press6to select “Done ”, then press Enter , wait until“Rename disc. Please wait....”disappears on the TV screen.“Menu ”screen returns.1-3 Record/Disc Setup (continued)