33be marked.n For these discs, the same scenes can viewed from each of thedifferent angles.Press the Angle button to change the scenes from one angle to otherangle(s).For example: 1/4, 2/4, 3/4, 4/4.Programmed PlaybackYou can play the contents of the disc in the order you want by program-ming the order of the tracks to be played. Up to 99 tracks can be stored.This function is only available in VCD( only in PBC OFF mode )/CD mode.1. Press n to stop playback.2. Press Program to enter program mode.n “PROGRAM P00:00 ”appears on the TV screen.n “PROG ”icon appears on the FL display.3. Use the number buttons (0 ~ 9) to input the track number in theorder you want. and then press Enter to confirm.n “PROGRAM PXX:YY ”appears on the TV screen.n The Track No. “YY ” is set to the No. “XX ” program.Note : If you make a mistake, press Clear to eliminate the numb-er you have input.4. Repeat step 3 as above to select other tracks.5. Press /ll to start programmed playback.n When all programmed selections have been played, the unitstops automatically.n The programmed contents are retained in memory. If press /llagain, programmed playback starts again.6. To stop programmed playback, press n .7. To cancel programmed playback, press n and then pressProgram.KODAK Picture CD PlaybackWith KODAK Picture CD, it’s easy to turn film into pictures you canemail from your PC and view on this unit.1. Press Open/Close to open the disc tray.2. Load the disc with the label facing up on the disc tray.3. Press Open/Close again to close the disc tray.n If you press /ll during the slide show, the slide show stopstemporarily. “Pause ” appears. Press /ll again to resume theslide show.n If the picture appears upside down, sideways, etc. Press 3/4/5/6 as follows:4: Rotate it 90 degrees clockwise.3: Rotate it 90 degrees counterclockwise.5: Change it to the vertically reversed image picture.6: Change it to the mirror reversed image picture.n If you press l / l during the slide show, it skips to theprevious picture or next picture.n To stop the slide show, press n. The thumbnail pictures appear.This operation works only with discs on which multiple subtitlelanguages are recorded.1. Press Subtitle repeatedly during playback to select the differentsubtitle language.2. If the subtitle language is not necessary, press Subtitle to select“SUBTITLE OFF ”.Notes :n In some cases, the subtitle language is not changed to the selec-ted one.n When a disc supporting closed caption is played, the subtitle andthe closed caption may overlap each other on the TV screen . Inthis case, turn the subtitle off.n When the desired language is not selected even if the button ispressed, the language is not available on the disc.n When the power is turned on or the disc is replaced , select thesubtitle language again.Audio (Selecting Audio Soundtrack Language )This operation works only with discs on which multiple audiosoundtrack languages are recorded.Press Audio repeatedly during playback to select the desired audiolanguage appears on the TV screen.Notes :n When the desired language is not selected even if the button ispressed, the language is not available on the disc.n When the power is turned on or the disc is replaced, select thelanguage again.n If the language is not recorded on the disc, only the availablelanguage on the disc will be heard.ZoomingThis function allows you to enlarge the picture on the TV screenand to pan through the enlarged image.1. Press Zoom repeatedly to select a zoom factor as below:ZOOM x 1.5ZOOM x 2ZOOM x 3ZOOM OFF2. To pan through the enlarged image, press 3/4/5/6 buttonsto move the zoomed picture left, right, up or down.Angle ( Viewing from a Desired Camera Angle )n Some DVD-Video discs may contain scenes which have beenshot simultaneously from a number of different camera angles.n The jacket or case of discs that are recorded with angles will3 Playback Features (continued)