Advanced techniquesTASCAM DP-01 Owner’s Manual 33PunchingPunch recordingWhen you have rehearsed your punch-in, you can start recording.1 Press the RHSL key so that the indicator goes out (but the AUTOPUNCH indicator is still lit).2 Press PLAY so that playback starts. Use the pre-roll time to get ready torecord.At the punch-in point, the DP-01 goes into record mode (the RECORDindicator lights).At the punch-out point, recording stops (the RECORD indicator goesout), and playback continues until the post-roll point and then returnsto the pre-roll point. The AUTO PUNCH indicator is turned off (thetrack arming status stays the same).z If you want to re-record the punch, turn AUTO PUNCH back on beforerecording again.Pre-roll and post-roll timesThe pre-roll and post-roll times can be set to suit your style of play-ing.1 Press MENU and scroll down to PREFERENCE and press the key.The pre-roll andpost-roll times canbe set between 1.0 seconds and9.9 seconds in 0.1 second steps2 Use the cursor keys to move the cursor to the Pre (pre-roll time) item,and use the jog wheel to set the value in seconds.3 Use the cursor keys to move down to the Post (post-roll time) item anduse the jog wheel to change the value.4 Press EXIT when you’re done, so that you can start using these settings.
