Audio CD Menu72 TASCAM DP-01 Owner’s ManualDP-01FX/CD Appendix5 When the CD PLAYER menu is displayed, the CD player can be con-trolled using the following keys:- STOP key: Stops the CD player.- PLAY key: Plays back the selected track.- F FWD key: Selects the next track.- REW key: Selects the previous track.- DATA dial: Selects a track to playback from the track list.- ENTER key: Plays the selected track.- STOP+REW key: Stops playback and locates at the start of the CD.(Press the REW key with the STOP key held down.)Making an audio CDOn the DP-01FX/CD, a song's master stereo track can be written toa CD-R or CD-RW (see “Mastering” on page 27), and this masterrecording can be burned to CD for audio CD playback.There are two ways of making a CD:Disk At Once (simply called "DAO" from here on)Track At Once (simply called "TAO" from here on)In the DAO recording, master stereo tracks recorded on the DP01FX/CDare written all at once.DAO finalized the disc when it's finished (see “Finalizing CDs” onpage 75), making the CD compatible with other CD players immediatelyafter writing by DAO has ended.With DAO, additional tracks cannot be written to the CD because it createsa finalized disc.In the TAO recording, master stereo tracks recorded on the DP01FX/CDare written to the CD on a trackbytrack basis.If you want to write tracks to a CD over several sessions, choose the TAO recording.Since TAO does not finalize the CD, this CD cannot be played back on aregular CD player (it can be played on the DP01FX/CD).After all of the desired master stereo tracks have been written by TAO,finalize the disc (“Finalizing CDs” on page 75).Additional tracks cannot be written to the CD after finalization has ended.Writing by Disk At OnceWith Disk At Once, the track order can be set when writing two ormore tracks.A silent gap of any desired length can also be added between tracks.1 Insert a blank CD-R or an erased CD-RW into the CD tray.2 Press the MENU key to display the AUDIO CD menu.