Advanced techniquesTASCAM DP-01 Owner’s Manual 49Using the USB connectionExporting the mastered stereo tracksWhen you have finished mastering (see “Mastering” on page 27),you may want to save the mastered stereo mix, otherwise it will beoverwritten when you next perform a mastering operation.Before you start this operation, make sure you have loaded the song whosemastered mix you will be exporting (and that it does indeed contain a stereomastered mix).1 Press MENU and select the WAVE menu.If there is no mas-tered mix, the dis-play will inform you.2 Select the EXPORT MSTR action and press the key. The display showsa default file name for you to edit:Press EXIT if youwant to cancel theexport operation.3 Use the left and right cursor keys and the jog wheel to name theexported mastered stereo mix (“Titling” on page 15).4 When you’re done, press ENTER to export the mastered stereo mix (asa single 16-bit 44.1kHz stereo WAV file).z The file is exported with the name you just entered, and a .WAV exten-sion.5 Connect the DP-01 to the computer and “open” the drive (““Open”and “Close”” on page 45).6 Use the PC operating system to copy or move the exported masteredmix file or files from the WAVE directory of the DP-01 FAT partition tothe PC.z Once the file or files are on the PC, you can “close” the DP-01.
