Tascam DP-01 Owner's Manual

Also see for DP-01: Owner's manual Specifications Quick start guide Quick start guide

Contents

Tascam DP-01 Owner's Manual Manual pdf 30 page image

Punching30 TASCAM DP-01 Owner’s ManualAdvanced techniquesPunch recordingWhen you have rehearsed your punch recording, you can start recording.1 Press the RHSL key so that the indicator goes out (but the AUTOPUNCH indicator is still lit).2 Press PLAY so that playback starts. Use the pre-roll time to get ready torecord.At the punch-in point, the DP-01 goes into record mode (the RECORDindicator lights).At the punch-out point, recording stops (the RECORD indicator goesout), and playback continues until the post-roll point and then returnsto the pre-roll point. The AUTO PUNCH indicator is turned off (thetrack arming status stays the same).… If you want to re-record the punch, turn AUTO PUNCH back on beforerecording again.Pre-roll and post-roll timesThe pre-roll and post-roll times can be set to suit your style of playing.1 Press MENU and scroll down to PREFERENCE and press the y key.The pre-roll andpost-roll times canbe set between 1.0 seconds and9.9 seconds in 0.1 second steps2 Use the cursor keys to move the cursor to the Pre (pre-roll time) item,and use the wheel to set the value in seconds.3 Use the cursor keys to move down to the Post (post-roll time) item andthe wheel to change the value.4 Press EXIT when you’re done, so that you can start using these settings.- - P R E F E R E N C E - -M e t e r : S . F a tP r e / 3 . 5 S e cP o s t : 1 . 8 S e c ;