Tascam DP-01 Owner's Manual

Also see for DP-01: Owner's manual Specifications Quick start guide Quick start guide

Contents

Tascam DP-01 Owner's Manual Manual pdf 59 page image

DP-01FX AppendixTASCAM DP-01 Owner’s Manual 59Balanced XLR inputs… The line of symbols on either side of the square gets shorter as theplayed note approaches the “target” and the center square fills whenthe string is in tune:Changing the tuning Most instruments are tuned with A=440 Hz. Ifyou are playing with another instrument that cannot be tuned, youmay want to change this value, but typically there is no need.… Use the wheel to change the reference tuning away from 440 Hz if youneed to do this.Noise reductionWhen you are recording, the background noise of microphones, or the noisefrom guitar amplifiers, etc. may cause problems. The DP-01FX allows you to“gate” this noise, and only open the gate when the input signal goes over acertain level. This only takes effect when the MULTI effect is enabled.1 Press MENU, and then select the PREFERENCE menu.2 Use the arrow keys to scroll to NSP:Using a noise gatelike this sometimesrequires a little work to makesure that you don’t accidentallycut off quiet parts of a song.Before you make a recordingusing the noise gate, it’s a goodidea to rehearse the whole partto make sure you’ve got the rightgate level.3 Set the level at which the gate opens to a value from OFF (the gate isalways open) through 1 (the gate will open easily, with very quietsounds) to 60 (a lot of force—quite loud sounds—is needed to openthe gate).- - - - - T u n e r - - - -C a l : 4 4 0 H zG| K |- - P R E F E R E N C E - -P o s t : 1 . 5 S e cE Q F R Q :N S P . 1 0 l