TASCAM DR-40X 394 – RecordingSelf-timer functionSimilar to a camera, the DR-40X has a self-timer function tobegin recording after a set period of time.1. Press RECORD [0] button when stopped or playingto put the unit in recording standby, and press the PBCONT button.2. The self-timer icon appears in the recorder statusscreen, and time is shown on the right.Each time you press the PB CONT button, the settingchanges as follows:Time shown to right of iconOFF (default) w 5S (5 seconds) w 10S (10 seconds)w OFF3. Set the time period, and press the RECORD [0] or PLAY[7] button.Recording will start after the set time period.NOTEi This function cannot be used when recording is paused inthe middle of recording.i Self-timer function is not possible when using the AUTOREC function.i During overwrite recording, the self-timer cannot be used.Solo functionPress and hold the 1/2 [SOLO] or 3/4 [SOLO] button toenable the solo function.Use this in 4-channel mode and other cases when multipleinputs are being recorded to monitor only one of the inputs.You can check the solo status with the input source icons.
