60 TASCAM DR-40X8 – Mark functionsAdding marks manuallyWhen playing, recording or recording is paused, press theENTER/MARK button to add a mark at the current point.When a mark is added, a pull-up appears at the bottom of thedisplay.NOTEi Mark information is stored in each file with numbers from01 to 99.i As the unit is compatible with the BWF format for WAVfiles, marks added to a WAV file during recording arestored in the file. Marks stored in the file are availablewhen playing back the file using a BWF compliantsoftware, etc.i When using the built-in mics, the sound of pressing thebutton when adding a mark could be recorded. To avoidthis, use a remote control to add marks.Adding marks automatically to arecordingThis function allows the unit to add marks automaticallyusing AUTO REC.On the REC SETTING screen, set the AUTO REC section MODEitem to MARK.For details, see "Using the automatic recording function(AUTO REC)" on page 35.Moving to mark positionsWhen stopped, paused or playing back, press the . or/ button while pressing the ENTER/MARK to movebetween marks set in the selected file.You can use this function like an index for cueing.NOTEYou cannot move to marks in a different file.Clearing marksWhen stopped or paused, move to a mark, and press theENTER/MARK button to clear that mark.
