Tascam DR-60D mkII Owner's Manual

Also see for DR-60D: Owner's manual Addendum

Contents

Tascam DR-60D mkII Owner's Manual Manual pdf 11 page image

TASCAM DR-60DMKII 119 Track status displayThis icon changes according to the recordingmode.Indicators(examples) MeaningPlaying a file recorded in MONOor STEREO mode/ // Monitoring in MONO mode/ Monitoring in STEREO mode/Playing a file recorded in DUALMONO or DUAL ST mode ormonitoring in these modesPlaying a file recorded in 4CHmode or monitoring in thismode0 Playback position displayThe current playback position is shown by a bar.q File nameThis shows the name of the file playing backunless there are multiple files recorded in4-channel recording mode or dual recordingmode.w Remaining timeThis shows the elapsed time (hours: minutes:seconds) of the current file.e Level align status: Level align function off: Level align function onr Playback equalizer status: Playback equalizer off: Playback equalizer ont Peak value in decibels (dB)The maximum level that occurs in a fixed periodof time is displayed digitally.PreparationPowering the unit8 Using AA batteries1. Remove the battery compartment cover on theback of the unit.2. Install 4 AA batteries with their ¥ and ^marks as shown in the battery compartment .3. Close the battery compartment cover.• Use the BATTERY TYPE item of the SYSTEMmenu to set the type of battery in order toaccurately show the amount of power remainingand allow the unit to accurately determinewhether enough power is available for properoperation. (By default, this is set to ALKAL foralkaline batteries.)Starting up the unitTo start up the unit from the stopped state, press andhold the button until “TASCAM DR-60DMKII”(start-up screen) is displayed on the display.The Home Screen appears when the unit starts up.Setting the built-in clockWhen the unit is started up for the first time (or whenthe built-in clock is reset after being left unusedwithout batteries), the DATE/TIME screen appearsbefore the start-up screen to allow the date and timeto be set.Shutting down (putting the unitin standby)Press and hold the button until “LINEAR PCMRECORDER” appears on the display.The power turns off after the unit completes itsshutdown (standby) process.