Tascam DR-60D mkII Owner's Manual

Also see for DR-60D: Owner's manual Addendum

Contents

Tascam DR-60D mkII Owner's Manual Manual pdf 16 page image

16 TASCAM DR-60DMKII4. Turn the DATA dial to set the limiter for micinput.Options MeaningOFF(default value) Limiter offMONO Limiter on only for selectedchannelLINK Limiter on for both selectedand linked channels5. When finished making the setting, press thestop (8) [HOME] button to return to theHome Screen.Using the low-cut filterUse the low-cut filter if you want to cut noise andother sounds at low frequencies. This functioncan be used to reduce air-conditioning noise andunpleasant wind noise, for example.1. Press the MENU button to open the MENUscreen.2. Turn the DATA dial to select INPUT SETTING,and press the DATA dial or / button toopen the INPUT SETTING screen.INPUT SETTING screen appears.3. Turn the DATA dial to select LOW CUT fora channel, and press the DATA dial or /button.Ch1 INPUT SETTING screen4. Turn the DATA dial to select the cut offfrequency of the low cut filter for mic input.Options: OFF (default value), 40Hz, 80Hz, 120Hz5. When finished making the setting, press thestop (8) [HOME] button to return to theHome Screen.Overview of recording modesThis recorder has five recording modes.Use the REC MODE item on the REC MODE screento set the recording mode. The settings available aredifferent for each recording mode.MONO modeThis is a mode for mono recording.STEREO mode (default value)This is a mode for stereo recording of twoindependent left and right channels.DUAL MONO modeThis mode uses one input source to create files attwo different input levels (set on INPUT SETTINGscreen). Two mono files will be recorded.DUAL ST modeThis mode uses one input source to create files attwo different input levels (set on INPUT SETTINGscreen). Two stereo files will be recorded.4CH modeThis mode records 4 external inputs in two pairs astwo stereo files.Two stereo files will be recorded.