Tascam DR-60D mkII Owner's Manual

Also see for DR-60D: Owner's manual Addendum

Contents

Tascam DR-60D mkII Owner's Manual Manual pdf 12 page image

12 TASCAM DR-60DMKIIInserting SD cards1. Open the SD card slot/USB port cover on theright side of the unit.2. Insert the SD Card into the slot as shown in thefollowing illustration until it clicks into place.Camera connection andattachmentIn order to output the sound from this unit to a DSLRcamera and monitor sound from the camera withthis unit, you must connect them with commercial-ly-available 3.5mm stereo mini plug cables.1. If you want to record audio from this unit witha camera, connect the CAMERA OUT (LOW)jack on the left side of this unit with the externalmic input on the camera.If you want to input audio from the camera andmonitor it with this unit, connect the CAMERAIN jack on the left side of this unit with theaudio output jack on the camera.DSLR cameraAudiooutput jackExternal micinput jackNOTE• If the output is not loud enough even whenthe CAMERA OUT (LOW) volume is set ashigh as possible, connect it to the CAMERAOUT (HIGH)/LINE OUT jack, and use theCAMERA OUT (HIGH)/LINE OUT volume toadjust the output level.• Refer to the camera’s operation manual toidentify this connector on the camera.2. Use the CAMERA OUT (LOW) volume controlon the left side of the unit to adjust the leveloutput to the camera.3. To mount the camera on this unit, use thecamera attachment screw on the top of theunit.Connecting monitors andheadphonesTo listen with headphones, connect them to thePHONES jack.To listen with an external monitoring system(powered monitor speakers or an amplifier andspeakers), connect it to the CAMERA OUT (HIGH)/LINE OUT jack.HeadphonesPowerd monitor speakersor amplifer and speakers