Tascam MINISTUDIO CREATOR US-42 Owner's Manual
Also see for MINISTUDIO CREATOR US-42: Owner's manualQuick start guide
                            | |
Contents
| 
20 TASCAM MiNiSTUDIO CREATOR6 REPEAT buttonWhen a repeat button is on, the arrows light and therepeat function for the triggered sound is enabled.Default: off7 LATCH/UNLATCH buttonThis sets the PON trigger pad mode.LATCH: Press a PON trigger pad once to startplayback, and press it again to stop playback.UNLATCH: Press and hold a PON trigger pad toplay the sound for as long as it is held down.Release the button to stop playback.8 VELOCITY buttonThis sets the operation modes of the PON triggerpads (1/2/3).When on, VELOCITY lights and operation is asfollows.Default: offOn: The playback volume of the PON sound isaffected by how hard the PON trigger pad(1/2/3) is pressed.Off: The playback volume of the PON soundis set by the LEVEL knob. It is not affectedby how hard the PON trigger pad (1/2/3)is pressed.Driver settings for specific purposes(Windows only)PurposeASIO driver set withDAW software orother applicationSound defaultdeviceUsing a DAW or otherapplication primarilyfor recordingMiNiSTUDIOUS-32/42 ASIO* Basic driver US-42*Using a DAW or otherapplication primarilyfor playbackMiNiSTUDIOUS-32/42 MixingDriverMiNiSTUDIOUS-32/42Using primarily for livebroadcast/karaoke* This might improve performance depending on theoperating conditions.NOTE“Additional driver US-32/42” is compatible withmajor communication apps.If you do not want “Additional driver US-32/42”to appear, right-click it to open the menu, select“Disable” and uncheck Show “Disabled Devices”.Using the ducking functionThis function becomes usable after the software andfirmware are both updated to at least version 2.0.When a mic signal is input, this function can automat-ically lower the volume of background music or othersound that is playing back on the computer or inputthrough the AUX jack on the front of the unit. Openthe ducking setting screen from the “Extra Effects”menu at the top of the Settings Panel.First, select the background music input source, andset the “THRESHOLD” knob.Then, adjust the “ATTENUATE” and “RELEASE TIME”knobs as necessary.1 DUCKING indicatorThis indicator appears lit within the duckingfunction is on.2 Ducked sound sourceSelect the source to be ducked.Only AUX can be selected when using a Mac.Options MeaningCOMPUTERBackground music playingon the computer will beducked.AUX(default) Background music playingfrom the AUX input will beducked.COMPUTER/AUX Both sources will beducked.3 Ducking function ON/OFF buttonsThese turn the ducking function on and off.4 Effect illustrationThis shows how the “ATTENUATE” and “RELEASETIME” knob settings affect the ducking level.5 THRESHOLD knobDucking is activated when the mic input exceedsthis set level.To use the ducking function when the mic inputlevel is low, set this parameter to a low value(−30dBFS is the minimum). |
Related manuals for Tascam MINISTUDIO CREATOR US-42
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine