Tascam MINISTUDIO CREATOR US-42 Owner's Manual
Also see for MINISTUDIO CREATOR US-42: Owner's manualQuick start guide
                            | |
Contents
| 
TASCAM MiNiSTUDIO CREATOR 90 REVERB knobThis knob adjusts the depth of the reverb effect.When set all the way to MIN, no reverb will beused and the signal will be 100% dry. When setall the way to MAX, the signal will be 100% wet.Use the Settings Panel to set the reverb type andparameters. (See “Settings Panel overview” onpage 15.)q PON trigger pads (1/2/3)Press these pads to play sounds set in theSettings Panel.Press them strongly to play sounds loudly andpress them weakly to play sounds softly.Use the Settings Panel to set the PON trigger padparameters. (See “Settings Panel overview” onpage 15.)w EFFECT buttonUse to turn the effect on/off for the soundsinput from the IN 1/IN 2 jacks on the top ofthe unit, as well as for the mic input for 4-poleheadphones with a built-in mic (y) and theheadset jack mic input (u) on the front of theunit.Set the effect type and parameters on theSettings Panel. (See “Settings Panel overview” onpage 15.)e ON AIR buttonThis turns on air mode on/off.If the CREATOR/BROADCAST switch (o) is set toBROADCAST, when this is on, the button lightsand the input sound (1, 3, y, u and i) andsound from the computer (sound of playbackfrom Windows Media Player, for example) aremixed and sent to the computer.If the CREATOR/BROADCAST switch (o) is set toCREATOR, this always stays on.Front panelr Strap attachmentst Headphones jack (stereo standard)Use this standard stereo jack to connect stereoheadphones.The same signals are output from the LINE OUTL and R jacks.y Headphones jack (stereo mini)Connect stereo headphones to this stereo minijack.This unit supports input and output for 4-poleheadphones with a mic and output for headsetheadphones.CAUTIONBefore connecting headphones, use theheadphones knob (6) to minimize the volume.Failure to do so could result in a sudden loudnoise that could harm hearing, for example.u Mic jack (TS mini)Connect the mic plug of a headset to this TS minijack.CAUTIONThe IN 1 jack (1) on the top of the unit, the micinput for 4-pole headphones with a mic (y), andthe headset jack mic input (u) cannot be usedat the same time.i External input jack (stereo mini)Use a stereo mini jack cable to connect this to theline output jack of a tablet or other device.Use the output level setting of the connecteddevice to adjust the input level.o CREATOR/BROADCAST switchSet this switch according to use.CREATOR: Select when using a DAW or othersoftware to create music. The signals inputthrough the IN 1 (1, y, u) and IN 2 (3)jacks are sent to the computer.BROADCAST: Select when using a computerfor live broadcast streaming, for example. Thesignals input through the IN 1 (1, y, u)and IN 2 (3) and external input (i) jacksare mixed to a mono signal. This is mixedwith the sound from the computer (soundof playback from Windows Media Player, forexample) and sent to the computer. |
Related manuals for Tascam MINISTUDIO CREATOR US-42
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine