Tascam MINISTUDIO CREATOR US-42 Owner's Manual
Also see for MINISTUDIO CREATOR US-42: Owner's manualQuick start guide
                            | |
Contents
| 
22 TASCAM MiNiSTUDIO CREATOR“Additional driver US-32/42” can be set as thedefault device without issue.• If you do not want “Additional driver US-32/42”to appear, right-click it to open the menu, select“Disable” and uncheck Show “Disabled Devices”.4. After completing the setting, click the OK button.5. Start Windows Media Player, select an audio fileand begin playback.NOTE• If you change the setting while Windows MediaPlayer is running, the software will not recognizethat the device has been changed. In this case,restart Windows Media Player.• If you still cannot hear sound after making thesettings and completing the procedures above,disconnect the USB cable and restart the computer.• If you make this setting, sound will be outputthrough this unit, but no sound will be output bythe computer’s speakers or headphones jacks.OS X and iTunes1. Open the Utilities folder in the Applicationsfolder, and double-click “Audio MIDI Setup”. Thenopen the “Audio Devices” window.2. Click “MiNiSTUDIO US-42” to select it and right-click or control-click it. Then, click “Use this devicefor sound output” in the pop-up menu.The speaker mark appears next to “MiNiSTUDIOUS-42”.NOTETo use this device as the recording device, set“MiNiSTUDIO US-42” to “Use this device forsound input”.3. Launch iTunes, select an audio file and startplayback.TroubleshootingPlease read this chapter if you are unable to use theunit properly even after setting it up following theprocedures in this manual.If you are still unable to resolve a problem, pleasecontact TASCAM customer support with the followinginformation about the operating environment anddetails about the trouble.8 Operating environment• Computer manufacturer:• Model:• CPU:• Memory (RAM):• Operating system:• Applications used:• Antivirus software:• Wireless LAN use:See the end of this document for contact information.8 The dedicated software cannot beinstalled.1. Check the operating systemThe operating system you are using might not besupported by the software that you are trying toinstall. Check the operating systems supportedby the software that you are trying to install.2. Stop software that is running in the backgroundAntivirus software and other software running inthe background can interfere with installation.Quit software running in the background and tryinstalling again.8 The unit is connected, but the computerdoes not recognize it.1. Install the dedicated softwarei If you have not done so, install the dedicatedsoftware. See “Installing the dedicated software”on page 10 for details.2. Change the USB porti This unit will not work with USB 1.1. Use a USB2.0 or USB 3.0 port.i Do not use a USB hub. Always connect the unitdirectly to a USB port on the computer.i If the above steps do not resolve the problem,connect the unit to a different USB port on thecomputer.8 There is no sound even though audio isplaying back on the computer.Windows• See the "Windows Media Player" section ofthe "Application guide", and make settings asnecessary for the OS. |
Related manuals for Tascam MINISTUDIO CREATOR US-42
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine