Tascam Professional CD-RW900 Owner's Manual

Also see for CD-RW900: Consultant’s Specification Owner's manual Technical information Specifications Specifications

1 TASCAM CD-RW9004−Playback operationsPlayback modesThere are four different playback modes. The select-ed mode will be indicated on the left of the display.≠ Continuous playback mode (default setting): noindication lamp≠ Single playback mode: SINGLE lamp is lit≠ Program playback mode: PROGRAM red lamp is lit≠ Random playback mode: RANDOM red lamp is litThe playback mode can be selected using the PLAYMODE key on the remote control unit. Pressing thekey changes the playback mode on the display in thefollowing order:Continue®Single®Program®RandomYou can also select the playback mode using thePLAY MODE option in the PLAY sub-menu (re-fer to “Operation basics” on page 15). Turning theMULTI JOG dial clockwise changes the playbackmode shown on the display in the following order:Mode>Cont®Mode>Single®Mode>Program®Mode>RandomPressing the MENU key or pushing the MULTI JOGdial returns to normal mode from the menu mode.While the mode can be changed from any playbackmode, the explanation in this manual will assume theuser is starting from the Continuous mode.NOTEThe selected playback mode remains after power isturned off. However, the program playback mode willbe cleared to “Continuous” mode when the power isturned off.Single-track playbackThis function enables playback of just a single track.1. When stopped, set the mode to display Single orMode>Single.2. Use the SKIP keys or the number keys (0~9)on the remote control to select the desiredtrack. The MULTI JOG dial can be used toselect the track also.3. Press the PLAY key to begin playback.After the selected track finishes, playback stops.Continuous playbackPrograming is cancelled, and playback continues inthe normal order.1. When stopped, set the mode to display Continueor Mode>Cont.2. Press the PLAY key to begin playback in order ofthe track number.Program playbackThis function enables playback of selected tracks inany desired order. Up to 99 tracks can be selected forpro-gram playback.1. When stopped, set the mode to display Program orMode>Program.2. Use the number keys (0~9) on the remote controlunit to select each desired track for program play-back, then press the ENTER key.You can also rotate the MULTI JOG dial to selectthe track number and push to enter.The track number will be entered into the pro-gram.Repeat the above step 2 until the desired programis completed. As the program is being created, theprogram number and total program playing time isrevised on the display.NOTEIf the CLEAR key is pressed, the programmed trackwill be deleted from the last.3. When program setting is completed, press thePLAY key to begin playback of the tracks in theprogrammed order.NOTE≠ If the STOP key is pressed without first pressingthe PLAY key, all the program data will be erased.≠ When stoppped, if the playback mode is switchedto another, all the program data will be erased.≠ The programmed play order is not memorizedwhen power is turned off.≠ In this mode, if there are no tracks programed, theCD-RW900 will not start playback.≠ If an attempt is made to enter more than 100 pro-gram steps, the message PGM Full! appears onthe display.≠ If the total program playing time exceeds 999 min59 sec, --- : -- appears on the display.