Tascam Professional CD-RW900 Owner's Manual

Also see for CD-RW900: Consultant’s Specification Owner's manual Technical information Specifications Specifications

TASCAM CD-RW900Rack-mounting the unitIf you are mounting the unit in a rack, leave 1U ofspace above it and 4 inch (10cm) or more of space atthe rear.Use the rack-mounting kit to mount the unit in astandard 19-inch equipment rack, as shown in thissection. Remove the feet of the unit before mounting.Thank you for your purchase of the TASCAM CD-RW900 CD rewritable recorder.Before connecting and using the unit, please taketime to read this manual thoroughly to ensure youunderstand how to properly set up and connect theCD-RW900, as well as the operation of its many use-ful and convenient functions. After you have finishedreading this manual, please keep it in a safe place forfuture reference.NOTEThis product is designed to help you record andreproduce sound works to which you own the copy-right, or where you have obtained permission fromthe copyright holder or the rightful licensor. Unlessyou own the copyright, or have obtained the ap-propriate permission from the copyright holder orthe rightful licensor, your unauthorized recording,reproduction or distribution thereof may result insevere criminal penalties under copyright laws andinternational copyright treaties. If you are uncertainabout your rights, contact your legal advisor. Underno circumstances will TEAC Corporation be respon-sible for the consequences of any illegal copyingperformed using the CD-RW900.1 − IntroductionSupplied accessoriesIn addition to this manual, the CD-RW900 has beenpacked with the following:≠ RC-RW900 remote control unit .............................1≠ AC power cable......................................................1≠ AAA batteries for the remote control unit .............2≠ A rack-mounting screw kit (screws and washers) ...1Contact your TASCAM supplier if any of these itemsare missing.About this manualIn this manual, we use the following conventions:≠ The names of keys and controls are given in thefollowing typeface: ERASE.≠ When the alphanumeric portion of the displayshows a message, this is shown in the followingtypeface: Welcome.≠ If a preset indicator in the display (i.e. one whichcannot change, but is either on or off) is shown,this is shown as follows: RANDOM.≠ Selectable value (i.e. values of dB) or ON andOFF selection (i.e. SRC>XXX) is shown in thefollowing typface: XXX.