Tascam TA-1VP Owner's Manual

TASCAM TA-1VP 15Setting up the TA-1VP is very straightforward.1 Find a suitable location. The TA-1VP is designed tobe mounted in a standard 19-inch equipment rack.2 Connect an audio output to the LINE IN jack orconnect a microphone to the front panel MIC INjack (see Chapter 5 for details of patching theTA-1VP into your system).3 Connect a cable to the MAIN LINE OUT jack. If youwill be using the TA-1VP’s Stereo Double Trackingfeature, connect a second cable to the DOUBLETRACK LINE OUT and route as desired (see Chapter5 for details of patching the TA-1VP into yoursystem).4 If you will be controlling your TA-1VP via MIDI,connect a MIDI cable from your MIDI source to theTA-1VP’s MIDI IN jack.5 The included PS-1225L AC adaptor willautomatically adjust to the available power worldwide. The AC power cord supplied with the ACadaptor is correct for the country where the TA-1VPis first sold. Contact TASCAM for replacementpower cords or adapters.IMPORTANT! Do not attempt to modify the adaptor oruse any other adaptor that is not specifically intendedfor the TA-1VP.6 Connect the AC adaptor’s DC plug to the DC IN 12Vjack on the rear of the TA-1VP. Then plug the ACadaptor into an AC outlet. Your TA-1VP will brieflydisplay the version number of its internal firmwareand then display the Select Preset page.TASCAMPS-1225LAC outletDC plugUse the hook (cord holder) on the rear panel to secure theAC adaptor cord. When connecting the cord to the unit,wrap it through the holder to prevent it from becomingdisconnected during use.3 – Setting Up the TASCAM Vocal Producer