Tascam TA-1VP Owner's Manual

18 TASCAM TA-1VPRear panel4 – Names and Functions of Parts# MAIN Line OutputThe TA-1VP’s main audio output. It accepts a 1/4-inchTRS (tip-ring-sleeve) phone plug.$ DOUBLE TRACK Line OutputIf you have selected stereo double tracking, thesecond track is available at this output. It accepts a1/4-inch TRS (tip-ring- sleeve) phone plug.% LINE INAccepts a balanced line level signal on a 1/4-inch TRS(tip-ring-sleeve) phone plug. Unbalanced sources canalso be connected, but they will be quieter, so extrainput level adjustment will be required.NOTEThis input is NOT a microphone input. A line level signal isrequired. Connect Microphones to the front panel MIC INjack.^ MIDI OUTConnect to the MIDI Input of a MIDI sequencer todump.Preset and Setup Data via MIDI SysEx.& MIDI INIf you will be controlling your TA-1VP via MIDI, connectthe MIDI Out from a MIDI sequencer, keyboard, orother MIDI source here. Connect the MIDI Out from asequencer to load previously saved SysEx data files.* DIGITAL OUTThis RCA jack outputs a S/PDIF digital signal with themain output on Left, Double Track output on Right.The Sampling Frequency is 44.1 kHz fixed.( FOOT SWITCHPlug in a footswitch here. A 1/4-inch TS (tip-sleeve) plug is required. There are two varieties offootswitches: those that are shorted by default andthose that are open by default. You should plug inyour footswitch and then power on the TA-1VP. TheTA-1VP will detect which kind of footswitch you haveand behave accordingly.The actual function of the footswitch is selected in theSetup Menu.) Cord hookUse the hook (cord holder) to secure the AC adaptorcord.Q DC IN 12V Power InputPlug the connector from the included AC adaptor(TASCAM PS-1225L) in here. Do NOT use an AC adaptorwhich is not expressly intended for the TA-1VP.