Tascam US-2x2 Owner's Manual

Also see for us-2x2: Reference manual Reference manual Owner's manual Owner's manual Owner's manual

Tascam US-2x2 Owner's Manual Manual pdf 7 page image

TASCAM US-2x2/US-4x4 7q MONITOR BALANCE knobUse this to adjust the balance between the mixedcomputer output and the mix of signals inputthrough the unit's input jacks.w PHONES jackUse this standard stereo phone jack to connectstereo headphones. Use an adapter to connectheadphones with a mini plug.Rear panelUS-4x4 rear panel US-2x2 rear panele r yt i e r t y ue LINE OUT (BALANCED) jacksThese standard TRS jacks are analog line outputs.(Tip: HOT, Ring: COLD, Sleeve: GND)r MIDI OUT connectorThis 5-pin DIN is a standard MIDI outputconnector.This outputs MIDI signals.t MIDI IN connectorThis 5-pin DIN is a standard MIDI input connector.Use this to input MIDI signals.y USB portUse the included USB cable to connect the unitto a computer or an iOS device. (Supports USB2.0.)u DC IN 5V connector (US-2x2 only)To use this unit when connected to an iOS device,connect a DC5V TASCAM PS-P520 adapter here(sold separately).i DC IN 12V connector (US-4x4 only)Connect the included DC12V AC adapter(GPE248-120200-Z) here.Installing software for the unitTo use this unit, a dedicated software must beinstalled on a computer.Download the latest dedicated software for theoperating system you are using from the TEAC GlobalSite (http://teac-global.com/).• With a Windows computer, when you install theincluded driver, a Settings Panel application willalso be installed at the same time.• With a Mac, you only need to install the SettingsPanel application. The standard OS driver willbe used.• With an iOS device, the standard OS driverwill be used, so there is no need to install anysoftware.CAUTIONRestarting the computer might be necessaryafter installation or uninstallation completes.Save your data and conduct other necessarysteps in other applications before quitting them.Installing the dedicated software andSettings panel for WindowsCAUTION• Complete installation of the driver on thecomputer before connecting the unit to it withthe USB cable.• If you already connected the unit to thecomputer using the USB cable, and the FoundNew Hardware Wizard launched, close theWizard and disconnect the USB cable.8 Driver installation procedures1. Download the latest driver for the operatingsystem you are using from the TEAC Global Site(http://teac-global.com/) and save it on thecomputer to be used with the unit.2. Uncompress the saved driver (zip file) on thecomputer desktop or another location.3. Double-click the “US-2x2_US-4x4_Installer.exe” file in the folder that appears after uncom-pression to automatically launch the installationsoftware.4. When a “Security Warning” or “User AccountControl” screens appear, click the “Run” or “Yes”button.