Tascam US-2x2 Owner's Manual

Also see for us-2x2: Reference manual Reference manual Owner's manual Owner's manual Owner's manual

Tascam US-2x2 Owner's Manual Manual pdf 8 page image

8 TASCAM US-2x2/US-4x45. Next, select the desired language and click the“OK” button.6. When the Installshield Wizard screen appears,click the “Next” button.7. Read the contents of the License Agreement,and select “I accept the terms in the licenseagreement” if you agree to the terms.Then, click the “Next” button.8. Next, click the “Install” button to start installation.9. The following screen appears when installationhas completed.Click the “Finish” button.The installer will quit and the computer willrestart.CAUTION• When installing the driver, a warning mightappear with a message such as, “The softwareyou are installing for the hardware has notpassed Windows Logo testing to verify itscompatibility with Windows.” If this messageappears, click “Continue Anyway” to proceedwith the installation.Installing the Settings Panel for MacOS XNOTE• Install the Settings Panel on the computer beforeconnecting the unit to it with the USB cable.• Depending on the Gatekeeper setting, a warningmessage might appear during installation. Forinformation about Gatekeeper, see “Note aboutGatekeeper” in “3–Installation” of the ReferenceManual.8 Settings Panel installation procedures1. Download the latest Settings Panel for theoperating system you are using from the TEACGlobal Site (http://teac-global.com/) and save iton the computer to be used with the unit.2. Double-click “US-2x2_US-4x4 Installer.dmg”,which is the saved disk image file for the driver,and double-click “US-2x2_US-4x4 Installer.pkg”inside the folder that opens.NOTEDepending on the computer’s settings, thedownloaded zip file might not have beenuncompressed automatically. In this case,uncompress the zip file first and then double-click the disk image file.3. When the installer starts, click the “Continue”button.4. Next, select the desired language and click the“Continue” button.