TASCAM X-48MKII 41Track Key PunchThe X-48MKII can be set to enter record mode without anytracks armed. Recording will then begin on any channelwhose track-arming button is pressed.In other words, even when all track record arming buttonsare off, you can press the transport REC and PLAY buttonsto start recording mode. Then, recording will start whenyou press a track record arming button.To enable this function:Mouse/Keyboard Operation1 Click the Windows menu and select the Settingswindow.2 Select the Transport tab. Check the box labeled TrackKey Punch.Front Panel Operation1 Press the PREF button. Press the 5/b buttons toselect Track Key Punch and press CHNG.2 Select either Off or On using the 5/b buttonsand press Enter.Recording timeSamplingfrequencies Quantization rates Built-in HDD data volume 960 GB Per 100 GB of external drive capacity48 track 24 track 48 track 24 track44.1 kHz16 bit 60 hr 33 min 121 hr 7 min 6 hr 33 min 13 hr 07 min24 bit 40 hr 22 min 80 hr 44 min 4 hr 22 min 8 hr 44 min32 bit floating 30 hr 16 min 60 hr 33 min 3 hr 16 min 6 hr 33 min48 kHz16 bit 55 hr 37 min 111 hr 16 min 6 hr 01 min 12 hr 03 min24 bit 37 hr 05 min 74 hr 11 min 4 hr 01 min 8 hr 02 min32 bit floating 27 hr 49 min 55 hr 38 min 3 hr 00 min 6 hr 01 min88.2 kHz16 bit 30 hr 16 min 60 hr 33 min 3 hr 16 min 6 hr 33 min24 bit 20 hr 11 min 40 hr 22 min 2 hr 11 min 4 hr 22 min32 bit floating 15 hr 08 min 30 hr 16 min 1 hr 38 min 3 hr 16 min96 kHz16 bit 27 hr 49 min 55 hr 37 min 3 hr 00 min 6 hr 01 min24 bit 18 hr 32 min 37 hr 05 min 2 hr 00 min 4 hr 01 min32 bit floating 13 hr 54 min 27 hr 48 min 1 hr 30 min 3 hr 00 minThe above recording times are estimates. Actual times will vary depending on the effective data capacity of a drive, the•number of projects and other factors.The built-in hard disk data volume capacity is the built-in hard disk less the space taken by the system volume.•5 – Recorder