56 TASCAM X-48MKIIMain unit settings menu DescriptionPREFAuto Chase Turn Auto Chase mode ON/OFFOne Button Record Enable recording with just the record buttonOne Button Rehearse Enable activating rehearsal mode with just the rehearsal buttonUpdate Punch Points Set whether or not punch-in and punch-out point settings areautomatically updated when starting and stopping recordingTrack Key Punch Set whether REC keys 1-48 can be used to punch-in and punch-outUse Pre/Post-Roll Turn pre-roll and post-roll ON/OFFPre-Roll Set the pre-roll timePost-Roll Set the post-roll timeTimeCode Display Set the time axis display unitMixer Bypass Turn mixer bypass mode ON/OFFLoop Mode Select the loop playback methodAES 2X Mode Set the AES/EBU card transmission mode when using 2x samplingfrequencies.S/PDIF Input SRC Turn the S/PDIF input sampling rate converter ON/OFFS/PDIF Pro Mode Set the S/PDIF input professional modeAuto Input Select the auto input modePunch Crossfade Set the crossfade time when punch recordingEDL Crossfade Shape Set the EDL crossfade shape typeOverload LED Time Set how long the (overload) indicator lightsAudio File Naming Set how names are given automatically to audio clipsAuto Save Turn the EDL automatic saving function ON/OFFAuto Save Time Set the time interval between when saving when using EDL automaticsavingP2 Track Arm Set whether or not tracks can be armed over the Sony 9-pin connectionP2 Punch Delay Set the amount of delay until execution after receiving a punch-incommand over the Sony 9-pin connectionP2 Chase Control Set the target chase source (LTC or MMC) when commanded to chasefrom the Sony 9-pin port.Meters Make various meter display settingsLooping Turn loop playback ON/OFFScrolling Set track screen scrollingLoad Last Project Set whether or not to load the project that was in use the last time theunit was shut downSYSSettings View and save system settingsMidi Device ID Set the MIDI device IDNetwork Make various address settings for the LAN networkAbout Show the software version9 – Appendix