Section 3 • Scheduled Maintenance ProceduresPart No. 227656GT GR™-20J • GR™-26J 3 - 7March 2022A-1Inspect the Manuals and DecalsGenie specifications require that this procedure beperformed every 8 hours or daily, whichevercomes first.Maintaining the operator’s and safety manuals ingood condition is essential to safe machineoperation. Manuals are included with eachmachine and should be stored in the containerprovided in the platform. An illegible or missingmanual will not provide safety and operationalinformation necessary for a safe operatingcondition.In addition, maintaining all of the safety andinstructional decals in good condition is mandatoryfor safe machine operation. Decals alert operatorsand personnel to the many possible hazardsassociated with using this machine. They alsoprovide users with operation and maintenanceinformation. An illegible decal will fail to alertpersonnel of a procedure or hazard and couldresult in unsafe operating conditions.1 Check to make sure that the operator's andsafety manuals are present and complete in thestorage container on the platform.2 Examine the pages of each manual to be surethat they are legible and in good condition.Result: The operator's manual is appropriate forthe machine and all manuals are legible and ingood condition.Result: The operator's manual is notappropriate for the machine or all manuals arenot in good condition or is illegible. Remove themachine from service until the manual isreplaced.Checklist A Procedures3 Open the operator's manual to the decalsinspection section. Carefully and thoroughlyinspect all decals on the machine for legibilityand damage.Result: The machine is equipped with allrequired decals, and all decals are legible andin good condition.Result: The machine is not equipped with allrequired decals, or one or more decals areillegible or in poor condition. Remove themachine from service until the decals arereplaced.4 Always return the manuals to the storagecontainer after use.Note: Contact your authorized Genie distributor orGenie Industries if replacement manuals or decalsare needed.