Terex Genie S-40 Operator's Manual

Also see for Genie Lift Guard S-40: Operator's manual supplement Maintenance manual Service and repair manual Maintenance manual Maintenance manual

Contents

Operator's Manual Seventh Edition • Second Printing20 S-40 • S-45 Part No. 226478Platform Control Panel1 Horn buttonPush the horn button and the horn will sound.Release the horn button and the horn will stop.2 Platform level switchMove the platform levelswitch up and the level of theplatform will raise. Move theplatform level switch downand the level of the platformwill lower.3 Platform rotate switchMove the platform rotateswitch to the right and theplatform will rotate to theright. Move the platformrotate switch to the left andthe platform will rotate to the left.4 Jib boom up/down switchMove the jib boom switch upand the jib will raise. Movethe jib boom switch down andthe jib will lower.5 Auxiliary power switchUse auxiliary power if the primary power source(engine) fails.Simultaneously hold the auxiliary power switchto either side and activate the desired function.6 Drive speed select switchMachine on incline symbol: Low range operationfor inclines.Machine on level surface symbol: High rangeoperation for maximum drive speed.7 Deutz Diesel models: Glow plug switch (ifequipped)Move the glow plug switch to either side andhold for 3 to 5 seconds.Perkins models: Glow plug indicator light8 Engine start switchMove the engine start switch to either side tostart the engine.9 Engine idle (rpm) select switchMove the engine idle select switch to the turtleposition for foot switch activated low idle.Move the engine idle select switch to the rabbitposition for foot switch activated high idle.10 Gasoline/LPG models: Fuel select switchMove the fuel select switch to the gasolineposition to select gasoline. Move the fuel selectswitch to the LPG position to select LPG.11 Red Emergency Stop buttonPush in red Emergency Stop button to the offposition to stop all functions and turn the engineoff. Pull out the red Emergency Stop button tothe on position to operate the machine.Controls