![Terex Genie S-40 Operator's Manual Manual pdf 54 page image](https://manuals-archive2.s3.amazonaws.com/4526461/94de6bb382517a84b7755d5459d787db54f.jpg)
Operator's Manual Seventh Edition • Second Printing52 S-40 • S-45 Part No. 226478SpecificationsS-45Height, working maximum 15.7 mHeight, platform maximum 13.7 mHeight, stowed maximum 2.49 mHorizontal reach maximum 11.2 mWidth 2.3 mLength, stowed 8.5 mMaximum load capacity 227 kgMaximum wind speed 12.5 m/sWheelbase 2.2 mTurning radius (outside) 4.78 mTurning radius (inside) 2.03 mTurntable rotation (degrees) continuousTurntable tailswing 86.4 cmControls 12V DC proportionalPlatform dimensions, 4 foot(length x width) 1.2 m x 76 cmPlatform dimensions, 5 foot(length x width) 1.5 m x 76 cmPlatform dimensions, 6 foot(length x width) 1.8 m x 76 cmPlatform dimensions, 8 foot(length x width) 2.4 m x 91 cmPlatform leveling self-levelingPlatform rotation 160°AC outlet in platform standardGround clearance 32 cmTire size, RT 12-16.5 NHSAirborne noise emissionsSound pressure level at ground workstation 84 dBASound pressure level at platform workstation 76 dBAGuaranteed sound power level 102 dBAMaximum allowable inclination of the chassis 4.5°Hydraulic pressure, maximum 179 bar(boom functions)Fuel tank capacity 76 litersSystem voltage 12VVibration does not exceed 2.5 m/s 2Weight 7974 kg(Machine weights vary with option configurations. Seeserial label for specific machine weight.)Maximum slope rating, stowed position, 2WDCounterweight uphill 30% 17°Counterweight downhill 15% 9°Side slope 25% 14°Maximum slope rating, stowed position, 4WDCounterweight uphill 40% 22°Counterweight downhill 40% 22°Side slope 25% 14°Note: Slope rating is subject to ground conditions andadequate traction.Drive speedsDrive speed, stowed 7.7 km/h12.2 m/5.7 secDrive speed, 1.1 km/hraised or extended 12.2 m/40 sec- all modelsFloor Loading InformationTire load, maximum 3855 kgTire contact pressure (per tire) 3.2 kg/cm2310 kPaOccupied pressure 996 kg/m29.77 kPaNote: Floor loading information is approximate anddoes not incorporate different option configurations. Itshould be used only with adequate safety factors.Continuous improvement of our products is a Geniepolicy. Product specifications are subject to changewithout notice or obligation.