Terex Genie Z-45 FE Operator's Manual

Also see for Genie Z-45 DC: Maintenance manual Maintenance manual Maintenance manual Operator's manual supplement Operator's manual

24 Z ®-45 FE • Z ®-45 DC Part No. 1299207GTFirst Edition • First PrintingOperator's ManualWork Area SafetyOperation on Slopes HazardsDo not drive the machine on a slope that exceedsthe maximum uphill, downhill or side slope ratingof the machine. Slope rating applies only tomachines in the stowed position.Maximum slope rating, stowed position, 4WDPlatform downhill 45% (24°)Platform uphill 25% (14°)Side slope 25% (14°)Note: Slope rating is subject to ground conditionswith one person in the platform and adequatetraction. Additional platform weight may reduceslope rating. See Driving on a Slope in theOperating Instructions section.Fall HazardsOccupants must wear asafety belt or harness inaccordance withgovernmental regulations.Attach the lanyard to theanchor provided in theplatform.Do not sit, stand or climbon the platform guardrails. Maintain a firmfooting on the platformfloor at all times.Do not climb down fromthe platform when raised.Keep the platform floor clear of debris.Lower the platform entry mid-rail or close the entrygate before operating.Do not enter or exit the platform unless themachine is in the stowed position and the platformis at ground level.Hazards related with the specific productapplication of exiting at height have beenconsidered in the design of the machine, forfurther information contact Genie (see sectionContacting the Manufacturer).Collision HazardsBe aware of limited sightdistance and blind spotswhen driving or operating.Be aware of the boom position and tailswing whenrotating the turntable.Check the work area foroverhead obstructions orother possible hazards.