Terex Genie Z-45 FE Operator's Manual

Also see for Genie Z-45 DC: Maintenance manual Maintenance manual Maintenance manual Operator's manual supplement Operator's manual

42 Z ®-45 FE • Z ®-45 DC Part No. 1299207GTFirst Edition • First PrintingOperator's ManualInspections21 Start the engine. See Operating Instructionssection.Result: At machine start up the ground controlmeter displays pitch and roll angles of themachine and the alarm will beep 4 seconds.DC Models:22 Select a test area that is firm, level and free ofobstruction.23 Turn the key switch to ground control.24 Pull out the red Emergency Stop button to theon position.Result: At machine start up the ground controlmeter displays pitch and roll angles of themachine and the alarm will beep 4 seconds.At the Platform Controls25 Turn the key switch to platform control.26 Pull out the red Emergency Stop button to theon position.27 FE models: Start the engine. See OperatingInstructions section.Test Emergency Stop28 Push in the platform red Emergency Stopbutton to the off position.Result FE models: The engine should turn off.29 Activate each function control handle, toggleswitch or thumb rocker switch.Result: No functions should operate.30 Pull out the platform red Emergency Stop buttonto the on position.Test the Horn31 Press the horn button.Result: The horn should sound.Test the Foot SwitchDC Models:32 Do not press down the foot switch. Test eachmachine function.Result: No functions should operate.FE Models:33 Push in the platform red Emergency Stop buttonto the off position.34 Pull out the red Emergency Stop button to the onposition and do not start the engine.35 Do not press down the foot switch and attemptto start the engine by moving the machine modeselect switch to hybrid mode.Result: The engine should not start.36 Move the machine mode select switch to hybridmode.37 Press and hold the foot switch.Result: The engine should start.38 Do not press down the foot switch and test eachmachine function.Result: No functions should operate.Test Machine Functions39 Press down the foot switch.40 Activate each machine function control handleor toggle switch.Result: All boom and platform functions shouldoperate through a full cycle.