Terex Genie Z-60 DC Operator's Manual

Also see for Genie Z-60 DC: Operator's manual supplement Service and repair manual Operator's manual Service manual Operator's manual

Second Edition • First Printing Operator's ManualWork Area SafetyPart No. 1292373GT Z®-60 DC • Z®-60 FE 19Work Area SafetyElectrocution HazardsThis machine is not electrically insulated and willnot provide protection from contact with or proximityto electrical current.Obey all local andgovernmental regulationsregarding requiredclearance from electricalpower lines. At a minimum,the required clearancecontained in the chart belowmust be followed.Line Voltage Required Clearance0 to 50KV 10 ft 3.05 m50 to 200KV 15 ft 4.60 m200 to 350KV 20 ft 6.10 m350 to 500KV 25 ft 7.62 m500 to 750KV 35 ft 10.67 m750 to 1000KV 45 ft 13.72 mAllow for platform movement, electrical line sway orsag, and beware of strong or gusty winds.Keep away from themachine if it contactsenergized power lines.Personnel on the ground orin the platform must nottouch or operate themachine until energizedpower lines are shut off.Do not operate the machine during lightning orstorms.Do not use the machine as a ground for welding.Tip-over HazardsOccupants, equipment and materials shall notexceed the maximum platform capacity or themaximum platform capacity of the platformextension.Maximum platform capacity 500 lbs 227 kgMaximum occupants 2The weight of options and accessories, such aspipe cradles, panel cradles and welders, will reducethe rated platform capacity and must be subtractedfrom the platform capacity. See the decals with theoptions and accessories.If using accessories, read, understand and obey thedecals, instructions and manuals with theaccessory.