Terex S80XCH-3101 Operator's Manual

Also see for Genie S-80 XC Series: Maintenance manual Maintenance manual Maintenance manual Service and repair manual Operator's manual

Operator's Manual Second Edition • Third PrintingTransport and Lifting Instructions64 S® -80 XC ™ • S® -85 XC ™ Part No. 1311085GTTrans port and Lifti ng Instr ucti onsObserve and Obey: Genie provides this securement information asa recommendation. Drivers are solelyresponsible for making sure machines areproperly secured and the correct trailer isselected. Genie customers needing to containerize anylift or Genie product should source a qualifiedfreight forwarder with expertise in preparing,loading and securing construction and liftingequipment for international shipment. Only qualified mobile elevating work platformoperators should move the machine on or offthe truck. The transport vehicle must be parked on alevel surface. The transport vehicle must be secured toprevent rolling while the machine is beingloaded. Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. Genie lifts are very heavyrelative to their size. See the serial label forthe machine weight. See the inspectionssection for the serial label location. Be sure the turntable is secured with theturntable rotation lock before transporting. Besure to unlock the turntable for operation. Do not drive the machine on a slope thatexceeds the uphill, downhill or side sloperating. See Driving on a Slope in the OperatingInstructions section. If the slope of the transport vehicle bedexceeds the uphill or downhill maximum sloperating, the machine must be loaded andunloaded using a winch as described in thebrake release operation. See theSpecifications section for the slope ratings.Free-wheel Configuration forWinchingChock the wheels to prevent the machine fromrolling.Release the wheelbrakes by turning over allfour drive hub disconnectcaps.Be sure the winch line isproperly secured to thedrive chassis tie pointsand the path is clear ofall obstructions.Reverse the procedures described to re-engagethe brakes.Note: The pump free-wheel valve should alwaysremain closed.