T+A K 6 CV User Manual

T+A K 6 CV User Manual Manual pdf 6 page image

Operation 6F6 remote control handsetThe F6 remote control handsetcontrols all the functions of the K6DVD surround receiver. The ad-justments you make are displayedon the integral screen and also ona TV set which is connected to thesystem.CD/DVDAUXTAPEPAUSEOKSTOPPLAY147SRCMENUFUNCTIONAMPT/CSRND2580369TUNERTV / STBVCRF6DISP A / BOVL+Basic functionspressbrieflySwitches the K6 on from the Off state *), and switches the unitto stand-by mode from the On state.In stand-by mode the K6's video pass-through circuit remainsin operation, i.e. the programme from the selected videosource continues to be passed to the TV set and video re-corder, and can therefore still be viewed and/or recorded.The programme source being passed through the machine isindicated on the screen. It can be switched at any time usingthe F6 RC handset.*) NoteThe pass-through function only works if the primary mainsswitch on the underside of the front panel is set to On.pressfor 2 sec.Switches the unit off.In the Off state only the integral alarm timer remains in opera-tion, and the integral screen displays the time of day. If thealarm function is active, the K6 switches itself on automaticallyat the programmed alarm time.pressfor 2 sec.Activates screen angle adjustment. The angle is adjustedusing the  and  buttons.press againfor 2 sec.Activates screen brightness adjustment. The brightness isadjusted by pressing the  and  buttons briefly.Source select Selects the integral CD/DVD player as programme source. Selects the integral tuner as programme source.pressrepeatedlyif necessarySelects the inputs AUX-A, AUX-PH and AUX-AV in turn andselects these units as program source.pressrepeatedlyif necessarySwitches to inputs TV and STB (= SET TOP BOX, SAT re-ceiver), and selects these devices as program source.pressrepeatedlyif necessarySwitches to the inputs TAPE 1 (analogue recorder) andTAPE 2 (digital recorder), and selects these devices as pro-gram source. Switches to the VCR input (video recorder) and selects this asprogram source.Amplifier functionsAdjusts volume in 1dB increments.shortpressSwitches the loudspeaker outputs in the sequence A -  B -  A+B.pressfor 2 sec.Switches off the loudspeaker outputs  A and  B(mute function).Surround functions (see chapter 'Surround sound - explanatory notes')shortpressDisplays the active surround mode on the integral screen.press shortrepeatedlyCycles the current music signal through the possible surroundmodes.press longrepeatedlyCycles the current music signal through the possible surroundmodes in reverse order.