Uniden BCD325P2 Owner's Manual

Also see for BCD325P2: Owner's manual

Contents

1073. Scroll to ‘Set Lockout’ and press E/yes.4. Scroll to ‘Unlocked’, ‘Temporary L/O’, or ‘Lockout’ and press E/yes to saveand exit.5. Scroll to ‘Set Hold Time’ and press E/yes.6. Enter the hold time (0-255 seconds) you desire and press E/yes to save andexit.Note: If you want to store any of the hits, set a hold time long enough to get tothe E/yes button when the frequency appears in the display.WEATHER OPERATION MENUYour scanner allows you to search for a local NOAA weather broadcast and set itto alert when a SAME weather alert is broadcast on a NOAA weather channel. Youcan also program FIPS codes into the scanner and use weather alert priority that willcheck the weather channel every 5 seconds for a weather alert signal.To Edit Weather Options, press Menu.1. Scroll to ‘WX Operation’ and press E/yes.2. Scroll to the settings and options below and press E/yes.3. Press Scan/Srch to return to scanning when done with editing.Weather Scan Program SAME Set Attenuator Weather AlertWeather AlertPrioritySet Delay Time Set Audio AGCWeather Scan The scanner starts scanning the preprogrammed weatherfrequencies and stops on the first good signal. If the signal is lost, the scannerresumes searching for another weather transmission.Note: You can also turn on weather scan by pressing and holding the WXbutton in scan or search modes.1. Scroll to ‘Weather Scan’ press E/yes.2. Press Scan to exit.In Weather Scan Mode:1. To search for another weather channel turn the scroll control.2. To start Weather Alert press Func then 0(wx).3. Scroll to ‘Alert Only’, ‘SAME 1-5’, or ‘All FIP’ and press E/yes.4. To return to Weather Scan from Weather Alert press Func then 0(wx).