Uniden BCD325P2 Owner's Manual

Also see for BCD325P2: Owner's manual

Contents

95Service Search allows you quickly select and search the scanner’s preprogrammedfrequencies. See Edit Service Search first.To start a Service Search, press Menu.1. Scroll to ‘Search for...’ and press E/yes.2. At ‘Service Search’ press E/yes.3. Scroll to: ‘Public Safety’, ‘News’, ‘Ham Radio’, ‘Marine’, ‘Railroad’, ‘Air’,‘CB Radio’, ‘FRS/GMRS’, ‘Racing’, ‘FM Broadcast’, ‘Military Air, or ‘Special’(itinerant?) and press E/yes to start searching.Or, Hold on any channel/frequency and press Func then the number key (1-3)assigned to the search. Then see Searching.Editing a Custom Search allows you to edit the 10 custom search ranges. Thedefault custom search range names appear as Custom 1, Custom 2, and so on. Seealso Band Defaults.To Edit a Custom Search, press Menu.1. Scroll to ‘Search for...’ and press E/yes.2. Scroll to ‘Edit Custom’ and press E/yes.3. Scroll to the custom search you want to edit (1-10) and press E/yes.4. Scroll to Edit Name and press E/yes. See Entering Text.5. Scroll to Edit Srch Limit and press E/yes.At ‘Set Lower Limit’, enter the lower limit of the search range and pressE/yes.At ‘Set Upper Limit’, enter the upper limit of the search range and pressE/yes.6. Scroll to Set Delay Time and press E/yes.7. Scroll to the desired delay time (-10, -5, -2, 0, 1, 2, 5, 10, or 30 secs.) andpress E/yes to save and exit. A negative delay will force a resume after thatnumber of seconds.8. Scroll to Set Modulation and press E/yes.9. Scroll to Auto, AM, NFM, FM, WFM, or FMB (Broadcast) then press E/yes tosave and exit.10. Scroll to Set Attenuator and press E/yes.11. Scroll to On or Off then press E/yes to save and exit.12. Scroll to Set Step and press E/yes. See also Auto Step Sizes.13. Scroll to Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz thenpress E/ to save and exit.14. Scroll to Set C-Ch only and press E/yes. (for Motorola and LTR systems).