67To Edit an Existing Location press Menu.1. Scroll to ‘Program Location’ and press E/yes.2. At ‘Select Type’ scroll to ‘POI’, ‘Dangerous Xing’, or ‘Dangerous Road’ andpress E/yes.3. Scroll to the location you want to edit and press E/yes.4. Scroll to the options below and press E/yes.5. Press Scan/Srch when editing is finished.POI Dangerous Xing or RoadsEdit Name Edit NameSet Type Set TypeSet Alert Set Alert VolumeSet LocationInfo Set Alert LightSet Range Set LocationInfoSet Lockout Set HeadingDelete Location Set Speed LimitNew Location Set LockoutGPS Display Mode Delete LocationGPS Review Location Mode New LocationEdit NameName The default name is POI, DXG (dangerous crossing), DRD (dangerous road),then YYMMDD hhmmss that indicates the year, month, date, and time if you storedthe location point with a GPS unit.1. Scroll to ‘Edit Name’ and press E/yes. See Entering Text.Set TypeIf you want to change the location type, the scanner resets the available optionsbased on the new location type and the scanner goes back to the ‘Program Location’menu for that location.1. Scroll to ‘Set Type’ and press E/yes.2. At ‘Select Type’ scroll to ‘POI’, ‘Dangerous Xing’, or ‘Dangerous Road’ andpress E/yes to save and exit.
