Uniden UBC 245XLT Trunk Tracker II Operating Manual

Contents

Uniden UBC 245XLT Trunk Tracker II Operating Manual Manual pdf 59 page image

Moving between Scan List MemoriesThere are a number of ways to step and move throughyour Scan List memories:1. Press repeatedly.2. Or, Press , then press or .3. Or, Press , Next press 0-9 (scan list number), thenpress 0-9 (memory position). For example. To move toScan List 4, memory position 10, press:, 4, 0,Multi-TrackThe UBC 245XLT allows you to track more than one systemat a time. Here are some highlights of this new feature:1.You can actually track up to 10 trunking systems atone time!2.You can trunk scan or search and scan conventionalfrequencies at the same time.3.You can program conventional frequencies in the samebank as trunking systems. After the radio finishes checkinga trunked system for activity, it will conventionally scan theother frequencies in the bank (remember, only trunkingfrequencies are programmed in TRUNK mode).To scan a mix of trunking and conventional banks, selectthe banks you wish to be active with trunking off, thenpress . The radio will instantly begin scanning. If youhave not programmed a trunking bank with talk group ID’s,you will receive an ERROR message for that bank. Youcan switch to SEARCH mode and the scanner will searchfor any active ID’s on the system.55