Uniden UBC 245XLT Trunk Tracker II Operating Manual

Contents

Uniden UBC 245XLT Trunk Tracker II Operating Manual Manual pdf 66 page image

Remote InterfaceYou can communicate and program your UBC245XLTin numerous ways with peripheral devices using theRS232C port. This radio offers the following modes: SMARTSCAN MODE*Automatically load frequencies, trunking talkgroups and fleetmaps from the Uniden NationalFrequency Database server into your scannerusing an external modem or an internal modemincluded with a PC.*The SmartScan feature is not supported at this time. However,it may become available in the future. REMOTE (PC Control) MODEProgram and control your scanner remotely from aPC using third party software (see the flyerincluded in the box). CLONE MODEClone all the frequencies and trunking talk groupsand fleet maps programmed into your scanner toanother UBC245XLT.Connecting the scannerScanner to PCPlug the smaller end of the supplied Remote Interfacecable into the remote port which is on the right side ofthe scanner. Plug the other end of the cable (DB-9 serialconnector) into a personal computer’s serial port. A fewPC’s may require an adapter, most will not. Of course,make sure your PC is turned on.To use SmartScan mode with an internal modem, you willneed a small custom software program to allow the serialport to talk with the internal modem and act as a simple“pass through” device. To download this free program, goto Uniden’s website, look up under Scanners“SmartScanner” or the UBC245XLT scanner, for the. BATT1 2 3 4 5 6 7 8 9 10BANKTRUNKATTDATA POLICE RR AIR MRN UHFCBSCAN SEARCH PRI HOLD DLY L/O62