Programmable keys 73Configuring a fixed forwarding keyS Hold down the programmable key you want to assign a function to until the pro-gramming prompt is displayed.Confirm to begin programming. The key illuminates continuously.z You can also configure this setting via the web interface Page 197.Select and confirm the option shown to program the first level for instance.Call forwarding depending on the forwarding typeSelect a forwarding type:• Forward all calls• Forward no reply• Forward busySelect and confirm the required function.Call forwarding depending on the call typeIf use of server feature has been enabled by administrator and the Ext/int for-warding function is activated, call forwarding by incoming call type functionalitywill be available to you. Forwarding in this case is dependent on the forwardingtype and additionally on the call type.Select a forwarding type:• CF unconditional - any• CF unconditional – int.• CF unconditional – ext.• CF busy - any• CF busy – int.• CF busy – ext.• CF no reply - any• CF no reply – int.• CF no reply – ext.Select and confirm this option to enter the forwarding destination.j Enter and confirm the phone number of the forwarding destination.Select and confirm the option shown.If the prompt is not displayed or a programmed function is not executed,then you can only launch key programming via the user menu (ask youradministrator about the current setting).OKNormal = fCF unconditional fCF unconditional - any fSetting fSave & Exit l
