94 Enhanced phone functionsCTI callsBeep on auto-answerSpeakerphone mode automatically activates on your phone if you use a CTI ap-plication such as Outlook to dial a number when Auto-answer is active. If Auto-answer is not active, the phone rings first and you have to press the loudspeakerkey or lift the handset to set up the call. This setting also defines whether or notincoming calls are automatically accepted. If the function is active, an alert beepsounds when an incoming call is automatically accepted.Information on the operation of the configured CTI application can be found inthe corresponding user guide.z You can also configure this setting via the web interface Page 197.Prerequisite: The option was programmed by your administrator.N Press the key shown.Select and confirm the option shown.Select and confirm the option shown.if nec.j Enter and confirm the user password.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.Select and confirm the option shown.SettingsUserConfigurationIncoming calls?CTI calls? fAutoAnswer = No fYes lAutoAnswer beep = NoYes lSave & Exit l
